Ferrous Materials:
Fiber laser 2000 watts, cutting area 48 x 96 in.
Mild Steel, from .06 in. (16 ga.) to .375 in. (3/8)
Aluminum, from .030 to .090 in.
Stainless Steel, from .030 to .075 in.
Non-ferrous Materials:
Co2 Laser 150 watts, cutting/engraving area 55 inches x 35 in. Machine capacity 55 x 96 in.
Plywood up to 1/4 inch thick
Acrylic up to 3/8 inch thick.
Cardboard up to 1/4 inch thick
Textiles (varies)
Short to medium runs welcomed.
